이 문서는 Google Cloud Translation API를 사용해 자동 번역되었습니다.
어떤 문서는 원문을 읽는게 나을 수도 있습니다.
Java의 Phaser 클래스는 일종의 협력 작업 스케줄링을 지원하는 다중 스레드 동기화 지원입니다. 즉, Phaser를 사용하여 여러 스레드에서 일련의 작업 실행을 예약하고 조정할 수 있습니다.
Phaser는 특히 동시 다중 팀 개발 환경에서 사용하기에 적합합니다. 예를 들어 개발자 팀과 함께 대규모 프로젝트를 진행하고 있다고 가정해 보겠습니다. 각 개발자는 다른 작업을 수행하고 있으며 각 작업에는 다른 타임라인이 있습니다. 모든 개발자의 작업을 조정하기 위해 Phaser를 사용하여 작업을 예약할 수 있습니다.
Phaser는 여러 스레드가 작업을 공동으로 수행해야 하는 상황에서 가장 일반적으로 사용됩니다. 예를 들어 Phaser를 사용하여 다중 스레드 개발 팀의 작업을 예약할 수 있습니다.
Phaser는 반드시 개발과 관련되지 않은 작업을 예약하는 데 사용할 수도 있습니다. 예를 들어 Phaser를 사용하여 CPU의 여러 코어에서 일련의 작업 실행을 예약할 수 있습니다.
Phaser를 사용하려면 먼저 Phaser 인스턴스를 만들어야 합니다. 그런 다음 Phaser 인스턴스를 사용하여 작업을 예약할 수 있습니다.
Phaser 인스턴스를 만드는 것은 간단합니다. Phaser 인스턴스를 사용할 스레드 수를 지정하기만 하면 됩니다. 예를 들어 Phaser를 사용하여 4스레드 개발 팀의 작업을 예약하는 경우 스레드 수로 4를 지정합니다.
Phaser phaser = new Phaser(4);
Phaser 인스턴스를 생성하면 이를 사용하여 작업을 예약할 수 있습니다. 이렇게 하려면 Phaser 인스턴스의 register()
method of the Phaser instance. For example, to schedule the task of thread 1, you would call the register()
method as follows:
phaser.register();
After calling the register()
method, the thread will be added to the Phaser instance and will be able to participate in the Phaser's scheduling.
Once the threads have been registered with the Phaser instance, you can use the Phaser's arriveAndAwaitAdvance()
method to have the threads cooperatively work on the task. The arriveAndAwaitAdvance()
method will cause the thread to arrive at the Phaser and then wait for all of the other threads to arrive. Once all of the threads have arrived, the Phaser will allow the threads to proceed.
Here is a simple example that shows how to use Phaser to schedule the tasks of a four-threaded development team:
페이저 phaser = new Phaser(4);
for (int i = 0; i < 4; i++) {
최종 int threadId = i;
새 스레드(() -> {
System.out.println("Thread " + threadId + " 시작 작업");
phaser.arriveAndAwaitAdvance();
System.out.println("Thread " + threadId + " 작업 완료");
}).시작();
}
In the example, we first create a Phaser instance with four threads. We then create four threads and register them with the Phaser instance. Finally, we use the Phaser's arriveAndAwaitAdvance()
method to have the threads cooperatively work on the task.
When the example is run, the output will be as follows:
스레드 0 시작 작업
스레드 1 시작 작업
스레드 2 시작 작업
스레드 3 시작 작업
스레드 0 완료 작업
스레드 1 완료 작업
스레드 2 완료 작업
스레드 3 완료 작업
보시다시피 Phaser는 스레드가 작업 실행에 협력하도록 했습니다.
이 기사에서는 Java의 Phaser 클래스를 사용하여 다중 스레드 개발 팀의 작업을 예약하는 방법을 살펴보았습니다. Phaser는 여러 스레드의 작업을 조정하는 데 사용할 수 있는 강력한 도구입니다.